ESD Work Surface Mat Kits are designed are technicians in Aviation, Cleanroom Electronic and Fiber Optics Manufacturing, Hospitals and Pharmaceutical Industries where Static charge is a concerned. ESD mat kits are made of Single layer Homogenous Polymer to Rubber material and are available from 1/16" to 3/8" thickness. All of our Kits include a 15' ground cord and a wrist strap. Most standard and common sizes and colors are shown below.
Application: Table Top use to provide static safe work surface for static sensitive products in Aviation, Cleanroom, Computer Operators, Computer Technicians, Electronic, Fiber Optics, Hospitals and Pharmaceutical Industries.
More Detail

ESD Mat is a made of a single layer homogenous Polymer Mix. It is designed provide static safe work surface for static sensitive products. This ESD Mat is low cost, durable, easy to cut and reversible. Surface resistivity is 109 – 1010 Ohms. Meets ASTM D412, D1004, D2240-75 and ESD S4.1-1997 standards. Service temperature of -20oF to 160oF.
Applications: Table Top use to provide static safe work surface for static sensitive products in Aviation, Cleanroom, Computer Operators, Computer Technicians, Electronic, Fiber Optics, Hospitals and Pharmaceutical Industries.
More Detail

ESD Mat has two layers, top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer. Surface resistivity is 105 - 106. The ESD Two Layer Mat material offers excellent resistance to oil, grease and most common solvent. The ESD Two Layer Mat is very light compared to our single layer and three layer mats. Temperature resistance to 200o F. Meets ASTM D-412, D-2240, EOS/ESD-S4, FTMS 101C standards.
Applications: Table Top use to provide static safe work surface for static sensitive products in Aviation, Cleanroom, Computer Operators, Computer Technicians, Electronic, Fiber Optics, Hospitals and Pharmaceutical Industries in high termperature setting.
More Detail

ESD Three Layer Mat, also known as a Three Layer ESD Mat is ideal for static dissipative and flexible work surfaces. The ESD Three Layer Mat has a solid vinyl, homogeneous construction with a buried conductive layer in between provides superior physical and electrical qualities. These ESD mats are considered to be our highest quality mat and the best at maintaing an ESD Safe environment. Meets ASTM D412, D624, D2240 and ESD S4.1-1997 standards. Surface resistivity is 107 - 108 Ohms. Temperature resistance to 160o F.
Applications: Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Aerospace and Hospitals.
More Detail

ESD Rubber Mat has two layers, top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer. Surface resistivity of the top layer is 108 - 109 and bottom layer is 105 - 106. This ESD Rubber Mat offers excellent resistance to oil, grease and most common solvent. This Mat is very light compared to our single layer and three layer mats.
Applications: Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Aerospace and Hospitals.
More Detail

ESD High Temperature Mat has two layers, top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer. Surface resistivity is 106 - 108. This ESD High Temperature Mat will withstand solvents, soldering iron deformation and has excellent abrasion resistance. Low outgassing and VOC makes it a preferred Mat for Cleanrooms and other controlled areas.The embossed surface reduces light glare and increase slip resistance. Withstands Soldering Iron contacts. This ESD Mat meets ASTM F-150, D-2240, NFPA-99, ES S7.1, UL-779, EN 100015/DIN51953 and EOS 20/20 standards.
Applications: Electronic Manufacturing, Pharmaceutical Plants, Soldering workstations, Electronic Repair, Cleanrooms, Fiber Optics, Aerospace and Hospitals.
More Detail

ESD Floor Mat Kits are made of closed-cell expanded polyvinyl chloride designed to provide comfort and reduce worker fatigue when used in static sensitive environment. The construction design of the ESD Floor Mat allows for effective static charge removal at a non-damaging flow rate and emboss pattern makes slip resistant. . Resistant to degradation by inorganic acid, organic acids, detergent solutions, alcohol, mineral oil and aldehydes. Application: Electronic Assembly, Pharmaceutical, Electronic Technician and Medical Equipment Manufacturing.
More Detail

ESD Anti Fatigue Mat also known as ESD Floor Mat is made of closed-cell expanded polyvinyl chloride designed to provide comfort and reduce worker fatigue when used in static sensitive environment. Surface Resistivity is 109 – 1010 Ohms. The ESD Anti Fatigue Mat is the most economical anti-static fatigue mat available.The construction design of the ESD Floor Mat allows for effective static charge removal at a non-damaging flow rate and emboss pattern makes slip resistant. At the same time the ESD Anti Fatigue Mat is known to maintain a consistent discharge throughout the life of the mat with no noticeable deterioration of effectiveness. Resistant to degradation by inorganic acid, organic acids, detergent solutions, alcohol, mineral oil and aldehydes. Suggested service temperature of -200 F to +1600 F. Meets ASTM D412, D624 AND D2240, ESD S4.1-1997. Available only in Brown and Gray.
Applications: Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Electronic Assembly, Electronic Warehousing, Circuit Assembly, Aerospace and Hospitals.
More Detail

ESD Floor Runners are made of 1/8" thick homogeneous polymer mix of durable PVC. ESD Floor Runners are ideal for production assembly rooms where an ESD safe area is required.This ESD runner has V-Groove emboss which makes it slip resistant. Surface Resistivity is 108 – 109 Ohms. Resistant to degradation by inorganic acid, organic acids, detergent solutions, alcohol, mineral oil and aldehydes. Suggested service temperature of -200 F to +1600 F. Meets ASTM D412, D624 AND D2240, ESD S4.1-1997. Available only in Gray.
Applications: Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Electronic Assembly, Electronic Warehousing, Circuit Assembly, Aerospace and Hospitals.
More Detail

ESD Rubberized Floor Mats are also known as ESD Floor Mats and are made of a rubberized Vinyl/Nitrile construction which makes it 2-3 times more resilient than the ordinary sponge mats. The combination of Vinyl and Nitrile rubber puts an added spring in user steps for added comfort which provides fatigue relief from prolonged standing. The ESD Floor Mat is designed for hard surface floor applications. The ESD Anti Fatigue Mat is the most economical anti-static fatigue mat available.The construction design of the ESD Floor Mat allows for effective static charge removal at a non-damaging flow rate. At the same time the ESD Anti Fatigue Mat is known to maintain a consistent discharge throughout the life of the mat with no noticeable deterioration of effectiveness. Surface Resistivity is 108 – 109. Service temperature of -20oF to 160oF. Available in Gray color only.
Applications: Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Electronic Assembly, Electronic Warehousing, Circuit Assembly, Aerospace and Hospitals.
More Detail

ESD Modular Floor Mats are ideal for virtually any environment where static charge is a problem. It is made of natural SBR and natural rubber compound. It has interlocking feature on both sides. A larger area can be covered by snapping multiple mats. These ESD modular floor mats are designed for comfort and reduce standing worker's fatigue. The mats must be grounded to drain the static charge. Resistivit is 105 to 8x105 Ohms. Available in Black color.
Applications: Computer assembly, Circuit board repair, Electronic Manufacturing, Medical and Pharmaceutical Industry.
More Detail

Cleanroom Sticky Mats are used in Cleanroom for semiconductors manufacturing, aerospace, biotechnology, laser optics, medical devices, pharmaceutical, food processing and hospitals. The ESD Cleanroom Mats helps maintain a clean and dust-free environment. Available colors are White and Blue.  Frame is not included.
Applications: Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Medical facilities and Hospitals.
More Detail

Cleanroom Rubber Mat is made of a chemically cross-linked material which makes it volume conductive. This material is developed to conform to the new Class Zero and RoHS requirements. Surface resistivity is 107 - 108. This Cleanroom Mat will withstand solvents, soldering iron deformation and has excellent abrasion resistance. Low outgassing and VOC makes it a preferred Mat for Cleanrooms and other controlled areas.The embossed surface reduces light glare and increase slip resistance. Temperature resistance to 240o F. This ESD Mat meets ASTM F-150, D-2240, NFPA-99, ES S7.1, UL-779, EN 100015/DIN51953 and EOS 20/20 standards. Color: White.
Applications: Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Aerospace and Hospitals.
More Detail

Conductive Mat is made of Rubber Surface with Nitricell Sponge Base. It quickly drains static electricity from workers before it can be passed on to sensitive equipment with microprocessors or to flammable liquid. This mat must be grounded to drain the static charge. Surface resistivity of the top layer is 104 - 8x105 and bottom layer is 104 - 8x105.
Application: Table Top use to provide static safe work surface for static sensitive products in Aviation, Cleanroom, Computer Operators, Computer Technicians, Electronic, Fiber Optics, Hospitals and Pharmaceutical Industries.
More Detail

Conductive Anti Fatigue Mat is made of Vinyl Surface with Nitricell Sponge Base. It quickly drains static electricity from workers before it can be passed on to sensitive equipment with microprocessors or to flammable liquid. This mat must be grounded to drain the static charge. Surface resistivity of the top layer is 106 - 8x106 and bottom layer is 106 - 8x106.
Application: Table Top use to provide static safe work surface for static sensitive products in Aviation, Cleanroom, Computer Operators, Computer Technicians, Electronic, Fiber Optics, Hospitals and Pharmaceutical Industries.
More Detail

Conductive Runner is made of Vinyl material. It quickly drains static electricity from workers before it can be passed on to sensitive equipment with microprocessors or to flammable liquid. This mat must be grounded to drain the static charge. Surface resistivity is 8x105 - 5x106.
Application: Table Top use to provide static safe work surface for static sensitive products in Aviation, Cleanroom, Computer Operators, Computer Technicians, Electronic, Fiber Optics, Hospitals and Pharmaceutical Industries.
More Detail

ESD Grounding Accessories: ESD grounding products include ESD common point ground cord for ESD mats and ESD Wrist straps, ESD bench ground block, ESD mat ground cord and snap tools
More Detail

ESD Table Top Mat Grounding Kits: These kits are designed for conversion of ESD Table Top Mat Rolls into customized kits for each work station. It includes Wrist straps, Ground cords, SnapSockets, Snapstuds and Snap Tool.

ESD Floor Mat Grounding Kits: Designed for conversion of ESD Floor Mat Rolls into customized kits for individual workstation. It includes Heel Grounder, Ground cords, SnapSockets, Snapstudes and Snap Tool.
More Detail

ESD Heel and Toe grounders are a good alternative to wrist straps when personnel can not be "tied" to a workbench. Workers who move around in the work area and who need to be grounded, cannot wear a wrist strap that grounds them to a workbench with a coil cord. Foot grounders function exactly the same way as wrist straps by providing a ground path from the moisture layer on the wearer's skin through the foot grounder to the grounded floor surface. We recommend that foot grounders be worn on both feet to ensure that one foot is always in contact with the floor or floor mat at all times. It is important that personnel are instructed in the proper use and maintenance of foot grounders.
More Detail

ESD Wrist Straps: Static is produced by the contact and separation of materials: Shoes and floors, clothes and the human body, parts being moved on or from surfaces. The generated charge will reside on the body until it is discharged - the familiar "zap" that all of us have experienced. It's the "zap" that does the damage. If we can prevent any static charge from building up on the body, then there is essentially nothing to be discharged. A properly grounded ESD Wrist Strap effectively prevents any static charge from building up. Any static charge that would tend to be created is instantly "drained" by the ESD Wrist Strap. The wrist strap maintains the potential equilibrium that is accomplished the hard way with the "zap".
More Detail

ESD Test Meters:
More Detail

ESD Constant Monitors: ESD Constant monitors reduce production costs by eliminating the time spent on testing wrist straps before each shift. Further savings may be realized by reduced ESD damage from broken wrist straps.

• Provides a green light for safe condition and a red light with Buzzer for unsafe condition
• The units are powered and grounded by the AC adapter
• Compatible with any standard wrist strap
• Easy to use: Simply plug in the wrist strap
• East to install: Attach the monitor to the bench with hardware and plug it in